1986 Frers 33

The current owner purchased the boat in Feb 2017, 1986 Carroll Marine Frers 33 Hull Serial # CIR3300B686. The survey from that purchase is available. 

Upgrades by current owner:

Winter 2019:

• Mainsail slides added to mainsail by North Sails
• New North Sails Nordac #2 Genoa with Sunbrella furling panels to make it the primary headsail for cruising.
• New North Sails Spinnaker
• Navtec Hydraulic Backstay rebuilt  

• May 2017, $3,138, Dockside Electronics: Raymarine Axiom 7" MFD Plotter at helm, Raymarine i70 Multi-Function Instrument Display and Fusion RA70 bluetooth stereo and cockpit speakers
• Sept 2017, $1,316, local rigger made running rigging updates
• Oct 2017, $8,241, North Sails Mainsail 3Di NorDac 16,800 Dpi, Genoa Medium 3Di Race 760 – never used for cruising, just Wed nites, Island Cup and Offsoundings plus a misc race here and there – check out NorDac https://www.northsails.com/sailing/en/sails/materials/3di/nordac -  I will never buy a laminate sail again! Both of these sails are in excellent condition.
• 2 usable spins (.05 and .06oz) and two older spins, never used storm trysail and misc other sails suitable for cruising, including older Dacron main. Boat came with carbon and aluminum spinnaker poles and a carbon whisker pole 

Here’s what the boat needs over the winter:

• One battery - recently failed, estimate $250
• Navtec hydraulic (backstay) seal replacement, estimate $700 provided by local independent rigger

Spring maintenance items include: refinish exterior wood – there isn’t much wood though, otherwise the owner indicates the boat has no mechanical or rigging issues 

September 17, 2019: I quickly activated this listing in the middle of busy Fall boat show season using owner-provided info and pics. I should be able to get more info and pics over the next couple weeks. Showings available most Tuesdays - Saturdays beginning on September 24, 2109.    

Principal Dimensions LOA 33 ft 3 in LWL 26 ft 6 in BEAM 11 ft 3 in DRAFT 6 ft 3 in BALLAST 4,000 lbs DISPL. 9,000 lbs SAIL AREA 560 sq ft

Construction

HULL
Molded fiberglass balsa cored hull comprised of alternating layers of biaxial and unidirectional E-glass with careful attention paid to proper fiber orientation. Polyester laminating resin is used with a surface of In-Plus gel coat along with an exterior fiberglass skin of vinylester resin.

DECK
Molded fiberglass deck with balsa core and marine plywood in areas of high stress. As in the hull, careful attention is paid to proper orientation of the biaxial and unidirectional glass fibers. The deck is through bolted and bonded to the hull at the sheer. All major bulkheads are bonded to the deck.

STRUCTURAL GRID
An interior structural grid system carries keel, rig, and hull loads. The grid is comprised of multiple plies of unidirectional E-glass and polyester resin. Aluminum and marine plywood are bonded into the grid in areas of higher loading.

RUDDER
Unidirectional and biaxial E-glass molded with polyester resin and high density foam core. The rudder stock is solid aluminum with wheel steering, brake and guard. A 40" destroyer wheel is standard.

KEEL
4000 Ibs. of lead alloyed with 4% antimony for hardness is bonded with epoxy and fastened with stainless steel bolts. Each keel is faired and primed with our exclusive vinylester resin and biaxial glass system.

Deck Hardware

* Bow pulpit is double rail welded stainless steel with integral USCG approved navigation lights
* Stern pulpit is double rail welded stainless steel with USCG approved stern light
* Stanchions are tapered stainless steel with upper and lower vinyl coated lifelines
* Custom stainless steel IOR style stemhead with tack horn
* Two bow chocks
* Forward mooring cleat, 8"
* Inboard genoa tracks
* Two low lead genoa cars with full length adjustment
* Teak toerail forward
* Aluminum toerail aft with adjustment slide cars
* Teak handrails on cabin top
* Halyards and controls lead aft through organizers to rope clutches
* Harken roller bearing traveller with 3:1 crosshaul system
* Two aft mooring cleats, 8"
* Diaphragm bilge pump in cockpit
* 40" stainless steel wheel, brake, guard

Standard Winch Package

* Primary: 2 each Barient 24A
* Halyards/Controls: 2 each Barient 21A
* Handle: 2 each Barient 10" std.
* Handle Pouch: 2 each

Hatches and Ventilation

* Forward hatch: 19n x 19" Aluminum
* Vent hatch, head: 13" x 7" Aluminum
* Vent hatch: 12" x 15" Aluminum
* Main companionway
* Opening port into quarter berth
* Fixed ports in main cabin, P & S

Spars

MAST
Double spreader, tapered aerodynamically designed section with trisect masthead. White paint standard. Internal conduit for wiring, with bowlight.

BOOM
Aluminum extrusion with internal 5:1 outhaul, 2-reefs, topping lift, tackhooks, and lock offs for reefs.

Rigging

STANDARD RIGGING
Navtec stainless steel solid rod rigging with internal tangs. In~plane upper and lower shrouds brought down to deck (continuous). Checkstays of 1 x 19 stainless steel wire with 4:1 block and tackle. Extended Navtec backstay turnbuckle for ease of conversion to hydraulic backstay.

Running Rigging

* Main Halyard 1 each, internal lead aft
* Main Sheet 1 each, with Harken 6:1 Hexaratchet
* Main Boom Iopping Lift 1 each, Stainless steel w/dacron tail
* Genoa/Spinnaker Halyard 2 each, internal lead aft
* Traveller Crosshaul 2 each
* Cunningham 1 each, 5:1 w/cam cleat
* Reefs 2 each, internal lead aft
* Outhaul 1 each, 5:1 internal

Mechanical

* Yanmar 2GMF 18 hp diesel, fresh water cooled
* 2:1 straight drive transmission
* Instrument panel with tachometer, warning lights, and buzzer
* Seawater strainer
* 2-Blade fixed propeller (folding optional)

Electrical

* 12 Volt DC system
* Main distribution panel with circuit breakers
* Main battery switch
* One 90 amp battery std., provision for 2nd battery
* Color coded wiring to ABYC specifications

Tankage

* Fuel 24 Gallons
* Water 30 Gallons
* Optional Water 30 Gallons

Accomodations

MAIN CABIN ACCOMMODATIONS
Two 6'4" berths with stowage outboard and 6'4" quarter berth with stowage underneath. Teak bulkhead mounted table with seating for six. Varnished teak and holly sole and overhead teak handrails. Removable overhead panels to access deck hardware.

V-BERTH
Double 6'10" berth, stowage underneath. Soft vinyl covered hull sides.

GALLEY
Two burner stainless steel alcohol stove with oven and slide away stove top standard. Stainless steel deep sink with pressure water. Molded FRP ice box with shelves and pump-out. Storage for dishes and consumable items.

HEAD
Includes marine head, vanity sink with pressure water, shower and sump pump, laundry hamper, mirror and towel rack.

INTERIOR LIGHTING
Includes reading lights over berths, navigator's spotlight, and overhead and indirect lighting as necessary.

These specifications and dimensions are correct at the time of printing.
They are subject to revision without notice.

CARROLL MARINE LTD.