Back to top

2011 C.W. Hood Katama 30

Norwalk, United States


This C.W. Hood Katama is in fantastic condition.  She has been maintained by a fastidious owner with an eye to detail that has been acquired from years of quality boat ownership. Everything from the bottom paint to the spectacular bright work is sure to please the discriminating eye. She is equipped with the powerful and reliable Volvo 370 Stern drive system.  The Volvo system delivers great power, maneuverability and rough water handling. Her large inviting cockpit gives you plenty of room for your guests to sit back and enjoy the ride.  At the helm you are greeted by an easy to read navigation center with auto pilot that allows you to operate  the vessel with confidence. Twin Stidd seats allow you great comfort for the helms man and the first mate.  Down below you are greeted by a beautifully appointed cabin with a stand up head, an adequate galley and a comfortable V-birth.

This C.W. Hood Katama is sure to please the most discriminating eye.


Basic Boat Info

Price: $250,000
Make: C.W. Hood
Model: Katama 30
Year: 2011
Condition: Used
Category: Power
Construction: Fiberglass
Range: 250 mi


Length: 30 ft
Length Overall: 30 ft
Waterline Length: 26'3 ft
Beam: 11 ft
Max Draft: 1'9 ft
Dry Weight: 9,000 lb
Single Berths: 2
Cabins Count: 1

Engines / Speed

Engines: 1
  • Make: Volvo
  • Model: D6
  • Drive Type: Stern
  • Fuel: Diesel
  • Engine Power: 370hp
  • Type: Inboard/Outboard
  • Propeller Type: 3 Blade, Stainless Steel, Duoprop
  • Year: 2011
  • Engine Hours: 180
Cruising Speed: 27.81 kn


Fuel Tanks: 1
Fuel Tank Capacity: 110 gal
Water Tanks: 1
Water Tank Capacity: 28 gal
Holding Tank Count: 1
Holding Tank Capacity: 28 gal


Heads Count: 1
Drive Type: Stern
Boat Class: Downeast, Cruisers


Peter Thorsby
Prestige Yacht Sales


Prestige Yacht Sales
48 Calf Pasture Beach Road
Norwalk, Connecticut, US, 06855


• Bulkheads finished in off-white Formica® with teak accents
• Interior hull sides finished in off-white V-groove panels
• Classic varnished teak and holly sole

• (2) Sunbrella® vee berth cushions and insert cushion by Hood Marine Canvas

• Enclosed head plumbed for hot/cold shower

• Raritan PHII marine toilet with holding tank, macerator and direct discharge

• Vanity mirror, toothbrush and cup holder, towel rack and toilet paper holder

• (3) Frigast overhead red/white cabin light

• (2) Frigast bulkhead reading lights

 • Isotemp DC refrigerator with door custom matched to interior finish

• Origo alcohol two-burner stove top

• (2) Scandvik stainless steel sinks

• (2) Scandvik single lever chrome faucets

• Hinged garbage bin

• Selection of Corian® countertops

• Hanging locker with rod, shelving and storage beneath

• (2) Cork-lined drawers beneath vee berth

• Shelving and storage throughout


Vacuum-bagged, cored construction using bi- axial fiberglass materials for lasting strength

• Structural grid with molded tanks and bilges, polished gelcoat surfaces throughout

• Molded rubrails and quarterguard rails with polished stainless steel inserts

• Blister resistant vinylester resins


• Cored construction with molded nonskid

• Oversized backing plates for all hardware

• Flush-mounted hardware throughout

• (2) Anchor locker access hatches with stainless steel hatch dogs

• (2) Molded pop-out panels for fuel (2), water and waste deck plates

• Varnished teak windshield with safety glass

• Varnished teak toe rail with (6) custom Integrated stainless steel chocks

• (2) Varnished teak handrails on cabin top

• Varnished teak eyebrows on cabin sides

• Large, tinted opening hatch on cabin top

• (4) Stainless steel opening portlights

• Stainless steel pop-up bow cleat (10″)

• (2) Stainless steel pop-up spring cleats (8″)

• (2) Stainless steel pop-up stern cleats (10″)

• (2) Stainless steel engine room vents

• (2) Recessed side deck drains empty overboard at waterline

• USCG approved navigation lights

• (3) Variable speed electric windshield wipers with washing jets

• Selection of deck colors

• US yacht ensign with varnished teak pole and stainless steel socket with retaining pin

• CW Hood burgee with varnished teak pole and stainless steel socket with retaining pin


• Self-bailing with flush, stainless steel drains

• Removable deck panels throughout for complete access to systems and bilges
• Hinged helm station provides complete access to electronics and wiring
• Complete engine gauge package, black face with stainless steel bezel

• Custom engraved stainless steel wheel with teak accents (16″)
• Single-lever throttle/shifter• Hynautic power steering system

• Ritchie powerboat compass (4″)

• 12V DC power outlet

• (5) Red cockpit courtesy lights

• (2) Stidd helm seats (Captains seat is powered) 

• Molded fiberglass engine box with gas lifts, day/full access and seating on top

• (2) Molded fiberglass storage boxes with varnished teak louvered sliders

• (2) Large bilge/storage access hatches with stainless steel hatch dogs

• Hinged aft bench with teak face and large storage compartment beneath

• Varnished, louvered teak companionway door with tinted overhead hatch and lock




• Volvo 370 hp marine diesel engine

• Volvo Duoprop drive system

• (4) Noise/vibration reducing engine mounts

• Soundown sound deadening insulation (2″)

• Quiet Centek wet exhaust system• Double-gasketed hatches in area of engine

• Bronze raw water strainer with scoop

• Manual fuel tank selector manifold and valves

• Racor fuel filter

• Monitoring system for all onboard tanks

• (2) Electric bilge pumps with auto float switches

• High-capacity manual bilge pump for safety

• Labeled Marelon® seacocks with plugs

• (2) 12V extreme duty AGM marine batteries

• Battery selector switch

• Bass backlit breaker panel

• High quality tinned wire throughout

• High quality marine hoses, double-clamped throughout

Manufacturer Provided Description

The C.W. Hood Katama 30 was designed primarily for use as a high-performance classic weekender, racing syndicate, or commuter yacht. Because of her superior hull design and her standard bow thruster (which is integrated into the ship's steering system with the use of a joystick control), the Katama 30 is simple to operate and maneuver. The deck, cockpit, and interior are well thought out with a place for everything onboard. In this design, there is a high priority placed on ergonomic functionality, which consequently gives the owner / operator a predictable, comfortable, and enjoyable boating experience. The Katama 30 combines the best of traditional aesthetics with the finest materials and modern construction techniques available.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

Please contact Peter Thorsby for a first hand description of this exceptional vessel.

Cell Phone 203-981-0145

Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.