2022 Beneteau America Oceanis 46.1

The Oceanis 46.1 offers a true balance between elegance, performance, and comfort. Her stepped hull adds massive amounts of volume below with no compromise to seakeeping abilities. Her deck and cockpit layout make her an easy boat to sail doublehanded, and a large number of custom options and trims ensure she will be tailored to each sailor’s expectations and requirements.

The Oceanis 46.1 is based on a Finot-Conq plan, keeping the distinctive stepped hull of the 51.1. Apart from her performance at sea and the huge amount of space that set this boat apart, this architecture makes optimal use of the cockpit beam. An incredibly efficient deck plan makes her wonderfully safe and easy to use. The furling mast, self-tailing jib and all the halyards and sheets brought back to a single winch at each of the helm stations, make maneuvering simple when short-handed sailing.

Large hull portholes bring a considerable amount of natural light right into the center of the boat, so that you can truly enjoy the elegant interiors by Nauta Design. A choice of satin light oak or mahogany set the tone and create the interior atmosphere, which can be readily customized.

Basic Boat Info

Make: Beneteau America
Model: Oceanis 46.1
Year: 2022
Category: Sail
Designer: Fino-Conq
Construction: Fiberglass
Keel Type: Other

Dimensions

Length: 47'11 ft
Length Overall: 47'11 ft
Length Of Deck: 44'9 ft
Waterline Length: 47'9 ft
Beam: 14'9 ft
Max Draft: 7'9 ft
Min Draft: 5'9 ft
Dry Weight: 23,356 lb
Ballast: 4,253 lb

Engines / Speed

Engines: 1
  • Engine Power: 57hp
  • Type: Inboard

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 53 gal
Water Tanks: 1
Water Tank Capacity: 98 gal

Other

Boat Class: Cruisers
More Info : Manufacturer Website
Construction
  • Design made following European Directive requirements and according to CE certification

  • Monolithic polyester contact hull

  • Monolithic contact structural counter mold (Fabric - resin) bonded to the hull

  • Injected deck construction in fiberglass and Saerform foam sandwich, covered with non-slip diamond pattern

  • Cast iron keel fixed with bolts and stainless steel backing plates

  • Twin rudders affixed with stainless steel stock

  • White hull - Grey metal hull decoration

  • 8 Hull portlights

Deck Equipment

RIGGING

  • Anodized aluminum mast, deck stepped with in-mast furling system, 2 Aft swept spreaders

  • Anodized aluminum boom

  • Cathedral type single-strand stainless steel standing rigging

  • Split backstay

  • Rigid boom vang

  • Self-tacking jib with on-deck furler

  • 2 Stand Up mainsheet blocks on the coachroof

  • 1 Self-tacking jib track with traveller

  • All lines lead back to the helm stations (except boom topping lift and genoa halyard)

  • Complete running rigging: Main halyard, Genoa halyard with cleat on mast, Boom topping lift with cleat on mast, Mainsheet, 1 Self- tacking jib sheet

  • 6 Clutches

  • Halyard covers

  • 2 Flag halyards

WINCHES

  • 1 Aluminum Speed Grip winch handle
  • 1 Self tailing winch (H40.2 STA) at each helm station
  • 2 Winch handle holders

SAILS

  • Furling mainsail Dacron, with UV protection Natural, horizontal cut (North Sails)

  • Self-tacking jib Dacron with UV protection Natural, horizontal cut (North Sails)

MOORING - ANCHORING GEAR

  • Self-draining chain locker - Clench bolt - Hatch cover
  • Single roller stainless steel bow fitting with offset roller
  • 12 V - 1 000 W vertical electric windlass - Remote control
  • 6 Aluminum mooring cleats, Length: 400 mm / 153/4’’ - Stainless steel chafing plate

SAIL LOCKER

  • Access by polyester cover, Passage width: 65 x 50 cm / 2’2’’ x 1’8’’
  • Stainless steel ladder
  • Shelving unit

SAFETY ON DECK

  • 1 Open stainless steel pulpit
  • 2 Stainless steel aft pushpits
  • 2 stainless steel handrails on coachroof
  • 1 Ring lifebuoy bracket
  • Welded ring on pushpit for flag
  • Double life lines and stainless steel stanchions, 650 mm / 2’ 2’’
  • Emergency ladder on pushpit

COCKPIT

  • Self-bailing cockpit
  • 1 Watertight compartment under cockpit benches & 1 Wet locker
  • 1 Locker in cockpit bottom
  • 1 Gas compartment under port helmsman seat
  • Teak slats on cockpit benches
  • Solid wood slatted helm seats with starboard storage locker
  • Foldaway helmsman foot chock
  • 2 Steering wheel consoles: Stainless steel steering wheels (900mm diameter / 2’11’’) - Anthracite leather covering - Steering gear at the helm station - Steering line transmission system - Stainless steel handrail
  • 2 Deck accesses for emergency tiller
  • 1 Emergency tiller
  • 1 Steering compass on the cockpit table
  • Engine throttle and control panel on starboard
  • Cockpit table, stainless steel frame, 2 wooden leaves, lighting, 4 glass holders, stainless steel handrails, lift raft storage
  • 1 Cockpit shower with mixer tap
  •  PMMA companionway door in 2 removable parts - Sliding hatch made of PMMA

SWIM PLATFORM / AFT TRANSOM

  • Fully opening transom, convertible into swim platform (2,65 m x 0,80 m / 8’8’’ x 2’7’’)

  • Intermediate cockpit access step

  • Manually controled

  • Teak decking on swim deck

  • 1 Stainless steel, removable bathing ladder with dedicated stowage in the cockpit

Contact Us


More From Beneteau America


2022 Beneteau America Oceanis 51.1
2022 Beneteau America Oceanis 34.1
2022 Beneteau America Oceanis 40.1
2022 Beneteau America Oceanis 38.1